Create Mikrotik Bandwidth Management & MRTG

Here is step / Step by Step make Mikrotik bandwidth management and create MRTG for monitoring bandwidth per-client Internet access. Technical management bandwidth settings apply to all types of Mikrotik, both Router Board Mikrotik, Mikrotik with ADSL Modem or PPPoE mode Mikrotik with ADSL Modem Bridge Mode.

Steps - steps that we should do is:

First : Login menu queues, like the image below:

Second: In the tab menu Simple queues, we make a fruit New Simple Queue for the WAN. On the menu General tab, give the name of the WAN with the target address 0.0.0.0 / 0. (Meant to monitor traffic to the IP Address anywhere from the WAN interface).

Advanced tab on the menu, we select the WAN interface as shown below:

Third: Next we make a fruit New Simple Queue for LAN. Simple Queue for LAN is what will we use as a SUPPLEMENTARY Simple Queue for Client (per-IP address). On the menu General tab, provide a LAN with a target address 0.0.0.0 / 0. (Meant to monitor traffic to the IP Address anywhere from a LAN interface).

Advanced tab on the menu, we select the LAN interface as shown below:

Fourth: Next we create a Simple Queue for setting per-Client IP Address Client a number of existing or us in making it at will. Well, Simple Queue is later that we will also be setting MRTG (Traffic Grapper).

On the menu General tab, give the name of Client 100 or with your name at will with the target address is 192.168.88.100 and we select the LAN interface. (Meant to monitor traffic with IP Address 192.168.88.100 Client that led to the LAN interface). Then we set Traget uploads and downloads to be 256 k, and we are setting its Parent-LAN (ie, PC Client is our bandwidth limit with a maximum speed of 256 kbps).

Fifth: Then we can copy Simple Queue had a number of our client PCs, lives changed its name and its IP address changed its course, and limit the bandwidth that we want.

Sixth: Upon completion queues for the book, then k itâ can do testing by conducting Download from a PC client that we will test. And as shown in the image below that if the Queue Client observed red color means it has reached the bandwidth limit we have set and if the color yellow means Client is approaching the bandwidth limit.

Seven: Then we will make MRTG from Simple Queue we have made earlier. Go to the Tools menu and select Graphing.

Kedelapan : Kita pilih menu Queue Rules, lalu pada option Simple Queue kita pilih nama Queue yang telah kita buat melalui menu Drop Down. Trus kita klik OK. Gitu aja sudah selesai koq, gak perlu setting macam – macam lagi dan tinggal kita Create sebanyak Queues yang telah kita buat dengan cara yang sama.

Eighth: We select Queue Rules menu, then on the option you select Simple Queue Queue name we have made through the Drop Down menu. Then, we click OK. So that's all done, do not need to set sorts - kind of our lives again and Create as many queues we have made the same way

Ninth: MRTG has been completed we made and we can access or see the view from the WebBox MRTG like the picture below and select the Graph menu.

Below is an example of MRTG we have made. Not easy at all ...? It's easier to try and do it than just thinking and imagining it ....

thank you.